*HM系列注塑机专用 HM series injection molding machine dedicated
抗磨液压油（列入国家级火炬计划项目）
antiwear hydraulic oil （Included in the national Torch Programprojects）
性能特点：
采用先进工艺，用优质矿物油添加美国进口高科技原料调配而成，具有优异的抗磨，防锈，破乳化和抗泡沫性能，适用于格式注塑机，油压机等中，高压液压系统润滑。
performancecharacteristics：
Use of advanced technology, withhigh-quality mineral oil to add U.S. imports of high-tech blend of rawmaterials, has excellent anti-wear, anti-rust, lubricating emulsion breakingand anti-foam properties, suitable for all kinds of injection molding machines,hydraulic machine, high pressure hydraulic systems.
理化特性：
Physicaland chemical properties
分析项目
AnalysisProject
运动粘度
Kinematicviscosity
40℃mm2/s
闪点不低于
Flashpoint, not less than:
倾点不高于
Pour point,not higher than:
*LIEP00注塑机关节专用润滑脂
LIEP00 INJECTION MOLDING MACHINElubricating grease ESPECIALLY for JOINT
性能特点：
以脂肪酸锂皂稠化精制矿物润滑油，并添加各类高性能添加剂，通过先进制脂工艺生产，具有优良的极压抗磨，剪切安定，抗氧化，防锈，泵送和抗水特性。适用于注塑机关节部位润滑，也适用于其他高负荷机械设备轴承，轴瓦和齿轮的润滑。
performancecharacteristics：
Fatty acid lithium soap thickenerrefined mineral lubricating oil, and add all kinds of high-performanceadditives, through the advanced Grease process production, with excellentextreme pressure and antiwear, shear stability, anti-oxidation, anti-rust,pumping and water-resistant characteristics. Applies the injection moldingmachine joint lubrication is also applicable to other high-load mechanicalequipment bearing, bearing and gear lubrication.
理化特性：
Physicaland chemical properties
分析项目
AnalysisProject
工作锥入度
Workedpenetration
*GS220注塑机关节专用润滑油：
GS220 INJECTION MOLDING MACHINELubricating oil ESPECIALLY for JOINT
根据注塑机关节部位的特点专门研制，产品具有特别优异的极压抗磨性能，同时具备防锈，抗氧化等特点，能在极高的压力下保护设备不磨损，另外GS220考虑到了关节的结构特点，其本身的较高粘度使油品不易快速流失。
Specially developed according to the characteristicsof injection molding machine joint, our product has excellent extreme pressureand anti-wear properties, protect the equipment not wear, along with anti-rust,anti-oxidation, high pressure, in addition GS220 taking into account the jointstructure characteristics of its higher viscosity so that the oil is not easyto rapid loss.
特别提醒：由于关节部位的特殊性，关节部位润滑绝不能采用液压油替代！
SPECIAL REMIND: Due to the special nature of the joints, the joints lubricated mustnot adopt the hydraulic oil to replace!
*BT耐高温螺栓润滑脂：
* BTHigh temperature bolt grease
本产品由特殊高温原料经特殊工艺加工而成，可以再高温苛刻的条件下保证部件螺纹和配合部位的润滑，防止粘结！使用温度范围为： -40℃ - -1100℃
This product is made of special high-temperature materials processed by a special process, can be hot and harshconditions to ensure the parts threaded and with parts of the lubrication toprevent adhesion!
Operating temperature range is: -40℃ - -1100℃
